Dear Reader,
Trees adorn our landscapes, offering shade, beauty, and a connection to nature. However, ensuring their structural integrity and stability is vital for their longevity. Common tree preservation services that you may be familiar with are tree pruning and mulching. Other uncommon services could be cabling or trunk injections depending on the specific tree. However, throughout my 4+ years of working at Russell Tree Experts, one service that I have not heard of up until this year is tree bracing! Let's delve into the world of tree bracing to understand the process and benefits!
What is Tree Bracing?
Tree bracing? I couldn’t initially picture what this meant when first hearing it. Let’s first break down tree bracing into two words. Tree. Bracing. Tree: A woody, perennial plant typically having a single stem. I know what that is. Brace: To make (something) stronger or firmer, or to prepare for something difficult or unpleasant. So would it be a solid guess that tree bracing is the process of making a tree stronger? Yes! That’s exactly what it is!
Tree bracing is a tree preservation service to reduce the risk of two or more stems from splitting apart or to fasten a split or cracked union together, thus improving the overall structure of your tree. This is achieved through the installation of brace rods to prevent select tree unions from spreading or twisting apart or to prevent a split or cracked union from worsening.
This sounds great! Let’s start bracing every single tree to improve their overall structure! Well, not so fast. Only certain trees will stand to benefit from tree bracing. Just like fertilizing trees with manganese or iron to treat a manganese or iron deficiency, this service is only recommended for trees that need it, otherwise there would be either no noticeable effect or even a decrease in structural rigidity. Just like with pruning, which involves removing (or “wounding”) the tree’s crown of undesired parts, bracing is a semi-invasive procedure that involves installing large threaded steel rods into the trunk of the tree, so we only want to install brace rods when the net result is positive and beneficial.
What Trees Should Be Braced?
So what trees should receive tree bracing? Well, as mentioned earlier, trees with a split or cracked union could benefit from brace rod installation. A split or cracked union should be easy to spot, especially in the winter in the case for deciduous trees as there is little to no foliage. A limb can split or crack due to various reasons like included bark (bark that is partially or fully embedded into the tree’s wood), improper pruning, disease, and storm damage from adverse weather like lightning, heavy winds, rainstorms, and thick layers of ice just to name a few. A split or cracked union can also occur from structural defects like large, long, horizontally growing limbs and codominant stems. If the limb is large and long and growing more horizontal rather than vertical, there could be a lot of weight-related stress near the union that could cause it to split if the limb is not supported properly or if end-weight reduction pruning does not occur. Codominant stems are two similarly sized stems originating from the same point of the tree and growing in the same, general direction. They can be characterized as having a tight “V” shape near the union or by both of the limbs competing to be the central leader of the whole structure. This is not ideal for a tree’s structure as they are prone to splitting during adverse weather conditions. In scenarios where removal of the branch or tree is not viable or preferred, tree bracing serves as a beneficial solution or alternative.
What Are the Benefits to Tree Bracing?
Tree bracing can be beneficial for a tree as they can minimize movement, ensuring the splits or cracks do not occur or worsen, especially during strong weather. A tree with poor structure or a split or cracked union may not want to be removed by the owner as it is a specimen tree (a tree chosen as a point of focus in a landscape) that provides aesthetics, shade, real estate value, or more. For some trees, it may also be unnecessary to remove them simply because of one or two weak, treatable unions that could even be healed over time. Tree bracing aims to improve the tree’s structure at a choice union and to give its owner more peace of mind that a union or limb has a decreased chance of failing, which would potentially end the tree’s life, or to keep it from falling onto something like a house, car, driveway, or anything else near the tree.
The Tree Bracing Process
Here at Russell Tree Experts, we use the ANSI A300 Tree Support System Best Management Practices to help guide us! With that said, before tree bracing begins, we typically prune the tree's crown to reduce weight and then install one or more cables in the crown to support the suspect union(s) from above. Once these initial steps are complete, we install a specified size and quantity of brace rods in your tree in accordance with the ANSI A300 Tree Support System Best Management Practices. The size and quantity is determined by factors such as the tree’s diameter below the union, number of limbs or unions being cared for, and whether or not there is or is not a split or crack present. To install the brace rods, holes are drilled straight through the tree near the union. The threaded brace rods are then fully inserted and will have excess rod on both ends. The brace rods are then secured with one or more washers, a lock washer, and a nut on both ends. The connections are then tightened as firmly as possible. Afterwards, the excess length of threaded rod is cut off close to the nuts and subsequently peened off to prevent any movement of the nuts. And voila! The end result is a tree with increased structural integrity and a reduced chance of failing!
I talked with my coworker Jacob, our Training & Development Manager and an ISA certified arborist, read through the ANSI A300 Tree Support System Best Management Practices, and looked at other resources online to see if it was an acceptable practice to drill holes through a tree to install brace rods. After considering a variety of sources, the general consensus is that the overall impact is minor because almost all of the drilled wounds are filled with threaded steel rod (except a 1/32'' gap), allowing the tree to compartmentalize the wounds rapidly, and that tree bracing should be done on trees that have a bigger concern to worry about, such as two codominant stems or a split union.
Professional assessment is imperative to determine the necessity of bracing for a tree. Signs such as co-dominant stems or split or cracked unions should prompt owners to get an opinion from an ISA certified arborist. After researching, observing, recording, and photographing various trees being braced, I felt empowered and motivated to share my newfound knowledge on this not-so-commonly heard of tree preservation service! The main purpose of this Arbor Ed article is to educate and share my findings, but Russell Tree Experts does provide tree bracing services should you want or need it! Our regional managers are all ISA certified arborists and can provide a free inspection and quote! Below are some videos about tree bracing!
Sincerely,
Enrique Arayata I Media Production Coordinator, Russell Tree Experts
In his free time, Enrique enjoys working out, hanging out with his girlfriend, video production and photography, cars, technology, cooking, and watching new movies and YouTube videos. He has a BA in moving image production with a double minor in film studies and studio art specializing in photography from The Ohio State University, an AA in web graphic design from DeVry University, and is an FAA Certified Remote Pilot.